Guglatech Ultra Fuel Filter for Husqvarna 701 KTM 690 Screw Cap ONLY

Fits Husky 701 with screw-type petrol cap*
Also fits KTM 690 Enduro with screw type petrol cap*

(Photos may not represent your filler nozzle but you get the idea – raised screw cap)

If you have the locking cap with the green cone, you adapt your installation process. The opening of the tank 701 has a tapered design which is smaller than the flange of the filter. So you’ll mount the filter flange below the triangular petrol cap fitting. Not a perfect setup, but it works. If you have a screw type petrol cap, the filter will fit directly below the cap.

New drop-in design fuel filter HDM3D Media INNOVATIVE WELDED FILTER EDGES FOR THE BEST DIRT/WATER SEPARATION HUGE XXL+ SURFACE

• Flange size 43mm
• Neck size 36mm

The new filter combines the extra fast HDM3D filtering media with the installing-friendly drop-in adapter, filter has a huge filtering surface of almost 1200 square cm with welded edges combining a very fast refueling with optimal EFI fuel pump and fuel filter protection.

This filter will prevent the need to keep changing fuel pump filters. The strainer at the base of the fuel pump is working at 60 microns and it’s useless to prevent damage to the fuel pump. The OEM filter is really small and can clog very fast, plus the fuel pump is exposed to all kind of particles and water contamination. This prefilter will prevent fuel issues, saving the EFI system and preserving it for many tens of thousand of miles.

While prefiltering during refueling, you can easily clean fuel pump filters instead of continuously changing them to keep the motor running smoothly.

After mounting your bike will be protected from contaminated petrol, keeping the whole system in top condition.

The media is washable, and thanks to it’s huge surface, will last for many thousands of miles. You can extract it, empty it and wash it should the case arise.

When ordering please list your bike’s make, model, and year in the order notes.